Issue |
EPL
Volume 112, Number 3, November 2015
|
|
---|---|---|
Article Number | 36002 | |
Number of page(s) | 6 | |
Section | Condensed Matter: Structural, Mechanical and Thermal Properties | |
DOI | https://doi.org/10.1209/0295-5075/112/36002 | |
Published online | 16 November 2015 |
Defect recovery and damage reduction in borosilicate glasses under double ion beam irradiation
1 CEA, DEN/DTCD/SECM, Laboratoire d'Étude des Matériaux et Procédés Actif - 30207 Bagnols-sur-Cèze, France
2 CIMAP-GANIL (CEA-CNRS-ENSICAEN-Univ. Caen) - BP 5133, 14070 Caen Cedex 5, France
3 CEA, DEN, Service de Recherches de Métallurgie Physique, Laboratoire JANNUS - F-91191 Gif-sur-Yvette, France
(a) mirinamulhaq@gmail.com (corresponding author)
(b) sylvain.peuget@cea.fr
Received: 13 August 2015
Accepted: 23 October 2015
A sodium borosilicate glass was irradiated sequentially and simultaneously with alpha particles and gold ions. Alpha particles induced partial recovery of the network damage and mechanical properties in the gold pre-irradiated glass, while no such recovery effect was observed during gold irradiation of the alpha pre-irradiated glass. The damage capacity of the gold ions was significantly reduced during simultaneous irradiation with alpha particles and gold ions. These results highlight that the irradiation sequence of the ions plays an important role in controlling the final damage level; and if properly employed, irradiation can be employed to induce defect recovery. Such results are of paramount importance to understand the radiation damage in nuclear reactor components and in nuclear waste glass matrices which are subjected to multiple particle irradiations.
PACS: 61.82.Ms – Insulators / 61.80.Jh – Ion radiation effects / 61.43.Fs – Glasses
© EPLA, 2015
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.